[elektro] NSA325 - Marvell 88F6282

[Jozsef Valkai]

Szerintem a pendrive-ra nem tud irni vagy vmi gondja van vele.

Probaltad masikkal?

-- 
( ͡° ͜ʖ ͡°)
--
Valkai Jozsef
+36 70 36 28 147
vjozsef at valkai.net



2016-03-02 16:41 GMT+01:00 Zakó János <janoszako at gmail.com>:

> Sziasztok!
>
> Van egy halott Zyxel NSA325-öm. Nem tudom, hogy HW vagy FW gondja van.
> Egyszer azt vettem észre, hogy nem megy. Lehet olyant csinálni, hogy USB
> flashdrive-ra rámásolni a BIN-t és "megeszi".
> Na ez nem. Soros portján nem jön ki semmi. Lövésem nincs ezekhez az ARM
> cuccokhoz, de bepróbálkoztam egy JTAG-al. Amúgy ha menne sem tudnám
> egyelőre, hogy hogyan tovább, de valami nem tetszik neki.
> Bemásoltam mit ír és a végét ismételgeti.
> Ha jól látom "meglátta" a CPU-t.
> Mi van ilyenkor?
>
> Előre is köszönöm a segítséget.
>
> Jani
>
> Open On-Chip Debugger 0.9.0 (2015-08-15-12:41)
> Licensed under GNU GPL v2
> For bug reports, read
>          http://openocd.org/doc/doxygen/bugs.html
> Warn : Interface already configured, ignoring
> Info : auto-selecting first available session transport "jtag".
> 'transport select <transport>'.
> trst_and_srst separate srst_gates_jtag trst_push_pull srst_open
> assert_srst
> adapter_nsrst_delay: 200
> jtag_ntrst_delay: 200
> adapter speed: 2000 kHz
> dcc downloads are enabled
> Warn : use 'feroceon.cpu' as target identifier, not '0'
> sheevaplug_load_uboot
> Info : J-Link ARM-OB STM32 compiled Dec 15 2010 11:30:03
> Info : J-Link caps 0x88ea5833
> Info : J-Link hw version 70000
> Info : J-Link hw type J-Link
> Info : J-Link max mem block 10328
> Info : J-Link configuration
> Info : USB-Address: 0xff
> Info : Kickstart power on JTAG-pin 19: 0xd1e22e00
> Info : Vref = 3.300 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 1 TR
> Info : J-Link JTAG Interface ready
> Info : clock speed 2000 kHz
> Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg
> 0a02, ver: 0x2)
> Info : Embedded ICE version 0
> Info : feroceon.cpu: hardware has 1 breakpoint/watchpoint unit
> Warn : ThumbEE -- incomplete support
> Error: usb_bulk_write failed (requested=78, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Polling target feroceon.cpu failed, trying to reexamine
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Examination failed, GDB will be halted. Polling again in 100ms
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Polling target feroceon.cpu failed, trying to reexamine
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Examination failed, GDB will be halted. Polling again in 300ms
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Polling target feroceon.cpu failed, trying to reexamine
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Examination failed, GDB will be halted. Polling again in 700ms
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Polling target feroceon.cpu failed, trying to reexamine
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Examination failed, GDB will be halted. Polling again in 1500ms
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Polling target feroceon.cpu failed, trying to reexamine
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Examination failed, GDB will be halted. Polling again in 3100ms
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Polling target feroceon.cpu failed, trying to reexamine
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
> Examination failed, GDB will be halted. Polling again in 6300ms
> Error: usb_bulk_write failed (requested=28, result=0)
> Error: jlink_tap_execute failed USB io (-107)
>
>
> -----------------------------------------
>           elektro[-flame|-etc]
>