[elektro] NSA325 - Marvell 88F6282

[Zakó János]

Sziasztok!

Van egy halott Zyxel NSA325-öm. Nem tudom, hogy HW vagy FW gondja van. 
Egyszer azt vettem észre, hogy nem megy. Lehet olyant csinálni, hogy USB 
flashdrive-ra rámásolni a BIN-t és "megeszi".
Na ez nem. Soros portján nem jön ki semmi. Lövésem nincs ezekhez az ARM 
cuccokhoz, de bepróbálkoztam egy JTAG-al. Amúgy ha menne sem tudnám 
egyelőre, hogy hogyan tovább, de valami nem tetszik neki.
Bemásoltam mit ír és a végét ismételgeti.
Ha jól látom "meglátta" a CPU-t.
Mi van ilyenkor?

Előre is köszönöm a segítséget.

Jani

Open On-Chip Debugger 0.9.0 (2015-08-15-12:41)
Licensed under GNU GPL v2
For bug reports, read
         http://openocd.org/doc/doxygen/bugs.html
Warn : Interface already configured, ignoring
Info : auto-selecting first available session transport "jtag".
'transport select <transport>'.
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open
assert_srst
adapter_nsrst_delay: 200
jtag_ntrst_delay: 200
adapter speed: 2000 kHz
dcc downloads are enabled
Warn : use 'feroceon.cpu' as target identifier, not '0'
sheevaplug_load_uboot
Info : J-Link ARM-OB STM32 compiled Dec 15 2010 11:30:03
Info : J-Link caps 0x88ea5833
Info : J-Link hw version 70000
Info : J-Link hw type J-Link
Info : J-Link max mem block 10328
Info : J-Link configuration
Info : USB-Address: 0xff
Info : Kickstart power on JTAG-pin 19: 0xd1e22e00
Info : Vref = 3.300 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 1 TR
Info : J-Link JTAG Interface ready
Info : clock speed 2000 kHz
Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg
0a02, ver: 0x2)
Info : Embedded ICE version 0
Info : feroceon.cpu: hardware has 1 breakpoint/watchpoint unit
Warn : ThumbEE -- incomplete support
Error: usb_bulk_write failed (requested=78, result=0)
Error: jlink_tap_execute failed USB io (-107)
Polling target feroceon.cpu failed, trying to reexamine
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Examination failed, GDB will be halted. Polling again in 100ms
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Polling target feroceon.cpu failed, trying to reexamine
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Examination failed, GDB will be halted. Polling again in 300ms
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Polling target feroceon.cpu failed, trying to reexamine
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Examination failed, GDB will be halted. Polling again in 700ms
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Polling target feroceon.cpu failed, trying to reexamine
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Examination failed, GDB will be halted. Polling again in 1500ms
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Polling target feroceon.cpu failed, trying to reexamine
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Examination failed, GDB will be halted. Polling again in 3100ms
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Polling target feroceon.cpu failed, trying to reexamine
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)
Examination failed, GDB will be halted. Polling again in 6300ms
Error: usb_bulk_write failed (requested=28, result=0)
Error: jlink_tap_execute failed USB io (-107)