[elektro] HP thermal throttle

[njjano]

Egyre jobb a tortenet, idezet az i82801GHM datasheetbol:

"THRM# Override Software Bit
The FORCE_THTL bit allows the BIOS to force passive cooling, independent of the 
ACPI 
software (which uses the THTL_EN and THTL_DTY bits). If this bit is set, the 
ICH7 
starts throttling using the ratio in the THRM_DTY field. 
When this bit is cleared the ICH7 stops throttling, unless the THTL_EN bit is 
set 
(indicating that ACPI software is attempting throttling).
If both the THTL_EN and FORCE_THTL bits are set, then the ICH7 should use the 
duty 
cycle defined by the THRM_DTY field, not the THTL_DTY field."

Tehat BIOS eredetu a problema, az billenti be azt a bizonyos force throttle 
bitet. A kerdes mar csak az, mi a feneert gondolja a bios hogy neki lassitania 
kene?? Megserulhetett a flash tartalom, probaljak egy bios-reflasht? A baj az 
hogy mar most a legfrissebb verzio van benne, nem tudom az update utility 
vegrehajtja-e az ujrairast ha nincs verzio novekedes... tapasztalataim alapjan 
altalaban nem :(

Jano