[elektro] Volt: Nyák nyomtatás megint Lett: Mit latott Dexter a Merciben

Fuzesi Arnold arnold.fuzesi.lista at gmail.com
Mon Apr 13 23:05:20 CEST 2009


Izzócsere olasz módra, érdekességképp:

Lancia Thesis... rettenetesen be van zsufolva a motortere... esélytelen bentről 
izzót cserélni...és ezt fel is ismerték :)

->

1-2 csavart meglazítasz a motortérben....hozzáférhető helyen.
Majd ennek következtében a teljes első lámpa kijön előre. Leteszed az asztalra, 
kicseréled amit kikell, majd vissza. Elég uras megoldás :)

1) Fit the special wrench on pin A
which can be accessed from the hous-
ing on the fender, next to the head-
light unit:
2) Turn the wrench until it comes to
a complete stop (1) (by 90°), clock-
wise for the right headlight or anti-
clockwise for the left headlight. Now
turn the wrench in the opposite di-
rection (2) until it clicks fastening into
the pin retaining spring.
3) Take off the headlight from its
housing until it comes to a complete
stop (about 15 mm).
4) Through housing B on the fender
(fig. 2 = right headlight unit - fig. 3
= left headlight unit), use a screw-
driver to press the retaining spring C
(fig. 4) and remove the headlight unit
completely.
5) Remove connector D (fig. 5) af-
ter retainer E has been moved aside.
6) Place the headlight unit on a
table.
7) Replace the lamps as shown in the
nstructions contained in the Owner's
Handbook.

A.



More information about the Elektro mailing list